Of the above four methods, the first two are commonly used, and customers can choose to use them in actual working conditions. The following editor briefly introduces several commonly used Wholesale planetary gear reducers cooling methods for reducers: The first one is to use a cooling fan.

The second type is the cooling coil.There are several cooling methods for industrial gearboxes. The fourth type is to use an external lubricating oil cooling device for cooling. This is easy to understand, is to use a combination of the above two. One thing to say here, there are two lengths of L3, the one we see now is with a fan, the length is longer, and the other is without a fan.

In this case, a cooling coil is placed in the gear box, and water is fed in while water is discharged at the same time. When the gearbox is in operation, use an oil pump to pump out the oil inside the gearbox for cooling, and at the same time add oil at room temperature to the gearbox, and use lubricating oil for cooling.. The third type is cooling fan + cooling coil.

The temperature of the lubricating oil in the gear box is lowered through the flow method. This method is suitable for equipment with large load and high heat generation. When installing, install a cooling fan at the end of the input shaft and blow it against the housing of the gearbox

Megosztás a facebookon